Buscar este blog

Professional balcony glazing

Being the most comfortable and widespread type of glazing today, installing structures on a balcony or loggia helps to solve several problems at the same time. On the balcony with glazing, you do not have to remove snow in winter or water in a rainy autumn-spring period. By connecting the loggia to the kitchen or hall, you can rationally increase the space. In addition, a well-glazed loggia can be turned into a winter garden or a room that gives life-giving freshness in the hot time. Reliable, comfortable and practical glazing will protect your loggia or balcony from the negative atmospheric effects of precipitation. With all the functional quality glazing should visually aesthetically look equally good (outside and inside). The glazing of a balcony has the following indisputable advantages: Metal-plastic glazing allows you to create a "warm" balcony: in the cold period, the air temperature in it will be 10-12 degrees higher than outside. In addition, the glazing will provide...

types of glass showers

 Tall showers Ideal for apartments with high ceilings and people of large stature. Such a cabin can easily accommodate a full set of shower equipment. If you compare high showers with other options for similar equipment, then design capabilities can be added to the above advantage. Low showers The low ceilings of city apartments should not be the reason for giving up the joy of owning a modern shower. Especially for rooms with limited height, low showers were created. Thanks to their dimensions, they successfully fit into the bathroom of a city or country house. Despite the difference in height, cabins of this type guarantee comfort during a shower. rt during a shower.

Atrium Fencing

Generally speaking, the atrium is the lobby of commercial and public buildings, similar to a courtyard, but consisting of two or more floors. Of course, this makes the object a potentially unsafe place to find and needs protective structures. Atriums have become widespread in modern architecture, as, however, is tempered glass. In modern shopping centers every year you can see more and more atriums, and there are several reasons for this. Perhaps this is primarily due to market trends, because as soon as a person enters the shopping center, visually he can make his own route to the desired boutique or store in a matter of seconds. If he first visited a shopping center, where there is an atrium space, all stores will be located literally in the palm of your hand. In addition, shopping centers with an atrium often have escalators, making shopping more comfortable.

Triplex filling technology

 

Triplex filling technology



The word triplex itself is of Latin origin and means triple. This term is usually referred to as a special technology for the production of glass products, and its result is laminated glass. The basis of triplex technology is the creation of a kind of “sandwich” of two or more glasses and a polymer layer between them. This layer is able to hold glass fragments upon impact, while at the same time its properties, as a material, remain unchanged.


Methods for the production of triplex

According to the production method, there are two types of triplex, distinguished by their qualities: -triplex created by film technology, it has the best optical characteristics, -triplex created by casting technology has higher strength. Consider the specifics of both methods of triplex production.


Triplex filling technology



Filling technology

Glass plates are glued to each other along the entire surface with a special adhesive fluid (resin), under the influence of uniform UV irradiation, the resin completely polymerizes - this is the way triplex is filled. Triplex multi-layer is produced sequentially, layer by layer, so that the resin solidifies equally. This method allows you to connect different both in texture and color and in the thickness of the glass.

Film technology

With this method of manufacturing triplex is placed between the sheets of glass, then the entire package is pre-pressed in the colander, and then it is finally glued at a temperature of 150 degrees Celsius in an autoclave. In the colander, the air remaining between the film and the glass layers is squeezed out mechanically using rubber shafts, resulting in a certain adhesion of the glass to the film. Triplex is unloaded from the colander almost transparent. Triplex produced by modern technologies has the ability to absorb sound, reduce ultraviolet radiation, thermal resistance and mechanical strength several times more than ordinary glass





0 Comentarios